Remote I/O module promotes the development of 3C lithium battery

As far as 3C lithium batteries are concerned, consumer terminals are undergoing tremendous changes. Driven by terminal markets such as TWS, smart wearables, and 5G mobile phones, the 3C lithium battery market continues to expand. While the market is expanding, electronic products are evolving towards lighter and thinner forms. This requires 3C lithium batteries to ensure large capacity and high energy density while having the characteristics of small size and light weight. This is inseparable Hot press shaping in lithium battery production. This poses a new challenge to lithium battery equipment, and many equipment manufacturers have turned their attention to the automation solution-the remote I/O.

Process parameters such as pressing pressure, pressing time and template temperature in hot pressing are very critical, but they are mutually restricted. For example, due to the gas permeability of the diaphragm and the characteristics of the pole piece material, it is required that the pressure of hot pressing should be as small as possible, and the time should be as short as possible. On the other hand, hot pressing and shaping must ensure that the process requirements of cell thickness and consistency are met. Therefore, key process parameters such as pressure, time and temperature need to be continuously optimized. In this process, the remote I/O System module is responsible for the key tasks of collecting process data and outputting control signals, and its fast accuracy and operational reliability are very important.solution.