M12 Interface 16 DI/DO Input Output IO-Link Module

How to connect the IO Link Sensor to the PLC:

1. Confirm that the supporting PLC supports communication protocols

Only by selecting the appropriate communication protocol can we choose the connected IO Link master station; Most of the Siemens PLCs used in the market support the Profinet communication protocol. Here we will introduce Siemens' support for Profinet protocol PLC as an example.

Brand: Siemens

Model: S7-1200

Through the introduction of the PLC model, if the PLC supports the Profinet communication protocol, it meets the requirements Profinet@IO-Link .

2. Confirm the number of IO Link Sensors used

Use 5 IO Link sensors, which may be laser sensors, pressure sensors, temperature sensors, etc; According to the number of sensors that need to be connected to the PLC, we choose an IO Link master station that can meet the port count of 5 IO Link sensors. Our main station has two types: 4-port and 8-port.

3. IO Link Connection Instructions

IO Link sensor lead to IO Link master station (connected through M12 interface); The IO Link master station is then connected to the PLC, forming the sensor signal transmission function of the IO Link. IO Link sensor data reading and designation are set in PLC configuration. Different sensors have different requirements.

M12 Interface 16 DI/DO Input Output IO-Link Module brings clear and clear benefits:

The use of unshielded 3-core cables allows for quick installation and low cost. Power supply method of the actuator: through the auxiliary port T Coded, with auxiliary power supply DK1208DO and DK1208DS;

The power supply for the DK1208DO actuator is 2A, and the power supply for the DK1208DS actuator is 500mA; Fast and reliable variety of changes: centralized provision of data to achieve continuous process control; Tools can be easily replaced with the help of hubs and data;

SVLEC's Sensor and Actorand I/O System, has lower costs, simplifies work, and shortens idle cycles while ensuring maximum efficiency.